Re: [foxboro] Installing CP40FT

Dale

If it's a CP40A, it needs the X-clip in the back.


Roger




                                                                                
                                                       
                      <doctorg@xxxxxxxx                                         
                                                       
                      tico.ca>                        To:  foxboro              
                                                       
                      Sent by:                        cc:                       
                                                       
                      foxboro-bounce@fr        Subject:  Re: [foxboro] 
Installing CP40FT                                               
                      eelists.org                                               
                                                       
                                                                                
                                                       
                                                                                
                                                       
                      09/08/2003 10:48                                          
                                                       
                      AM                                                        
                                                       
                      Please respond to                                         
                                                       
                      foxboro                                                   
                                                       
                                                                                
                                                       
                                                                                
                                                       




I can safely say yes to all those questions.  I've checked and
double-checked these issues.
>
> From: Neil Martin <neil_martin@xxxxxxxxxxxx>
> Date: 2003/09/08 Mon AM 11:25:54 GMT-04:00
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Installing CP40FT
>
>
>
>
>
> Is it defined in Sys Def as FT?
>
> Do both modules boot by themselves?
>
> Do you have the clip installed across the front of the FT pair of
Modules?
>
> Are the CP EEPROM software revs the same level?
>
> Neil Martin
> Huntsman Polymers Corporation
> 2505 South Grandview
> Odessa, TX.  79766
> ph) 432-640-8436
> pager)432-742-4289
> email page)9157424289@xxxxxxxxxxxxxxxxxx
>
>
>
>                       <doctorg@xxxxxxxx
>                       tico.ca>                 To:
<foxboro@xxxxxxxxxxxxx>
>                       Sent by:                 cc:
>                       foxboro-bounce@fr        Subject:  [foxboro]
Installing CP40FT
>                       eelists.org
>
>
>                       09/08/03 10:01 AM
>                       Please respond to
>                       foxboro
>
>
>
>
>
>
> Could anyone give me specific instructions on how to install a CP40FT
Pair
> on V 6.3 AW51B Box.  I'm using SYs Def 2.3.  Did the commit thing and
> everything seems to go fine but I can only get one of the pair to boot.
> They will not marry.  Any hints would be great.
>
>
> Dale Gillis
> Inst Tech
> 902-625-2460 Ext 4401
> dale.gillis@xxxxxxxxxxxxx





 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: