Re: [foxboro] Installing CP40FT




Is it defined in Sys Def as FT?

Do both modules boot by themselves?

Do you have the clip installed across the front of the FT pair of Modules?

Are the CP EEPROM software revs the same level?

Neil Martin
Huntsman Polymers Corporation
2505 South Grandview
Odessa, TX.  79766
ph) 432-640-8436
pager)432-742-4289
email page)9157424289@xxxxxxxxxxxxxxxxxx


                                                                                
                                                 
                      <doctorg@xxxxxxxx                                         
                                                 
                      tico.ca>                 To:       
<foxboro@xxxxxxxxxxxxx>                                                 
                      Sent by:                 cc:                              
                                                 
                      foxboro-bounce@fr        Subject:  [foxboro] Installing 
CP40FT                                             
                      eelists.org                                               
                                                 
                                                                                
                                                 
                                                                                
                                                 
                      09/08/03 10:01 AM                                         
                                                 
                      Please respond to                                         
                                                 
                      foxboro                                                   
                                                 
                                                                                
                                                 
                                                                                
                                                 




Could anyone give me specific instructions on how to install a CP40FT Pair
on V 6.3 AW51B Box.  I'm using SYs Def 2.3.  Did the commit thing and
everything seems to go fine but I can only get one of the pair to boot.
They will not marry.  Any hints would be great.


Dale Gillis
Inst Tech
902-625-2460 Ext 4401
dale.gillis@xxxxxxxxxxxxx




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: