Re: [foxboro] Infusion

I have a compound that shows up in the IDE and blocks can be modified but 
it does not show up under FoxSelect.   We do not have any actual I/O 
connected to any of the FBMs yet so it is hard to monitor any inputs.   We 
have deployed and undeployed several times, saved the compound and blocks 
etc..   We have rebooted the Aw and the Galaxy without any luck.    The 
only thing we have not done is reboot the CP.   Anyone have any 
suggestions.
Tommy Keith
Senior DCS Engineer
Fluor Power Division
------------------------------------------------------------
The information transmitted is intended only for the person 
or entity to which it is addressed and may contain 
proprietary, business-confidential and/or privileged material.  
If you are not the intended recipient of this message you are 
hereby notified that any use, review, retransmission, dissemination, 
distribution, reproduction or any action taken in reliance upon 
this message is prohibited. If you received this in error, please 
contact the sender and delete the material from any computer.  

Any views expressed in this message are those of the individual 
sender and may not necessarily reflect the views of the company.  
------------------------------------------------------------


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: