Re: [foxboro] IP address change
- From: "Troy L Brazell" <tlbrazell@xxxxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 24 Jan 2003 07:17:29 -0600
Sorry, it's early and I haven't had enough coffee. I sent the wrong set of
instructions. This is way I do it for our ethernet network.
Second Ethernet Port Setup
Used for changing or adding the AW to the company LAN
# cd ^/etc
add the ip address and machine name to the hosts file, you will also need
to edit the netmask to add the default gateway.
add the machine name to the hostname.hme1 (or if it is token ring tr?) or
leX
To keep from having to reboot the machine for the changes to take affect
you can use the following commands:
# ifconfig hme1 (tr?)^plumb [enter]
# ifconfig hme1 (tr?) xxx.xxx.xxx.xxx (ip address)^netmask ^xxx.xxx.xxx
(netmask number)^up [enter] (all one line)
Adding a default gateway:
# netstat^-r [enter]
type route add default xxx.xxx.xxx.xxx (default router address)^l [enter]
On some systems you may have do the following to make the default router
permanent:
/etc/fox
textedit the rc.foxapps file and add the following
route add default xxx.xxx.xxx.xxx (router address)
If this file does not exist create the file by doing the following:
Textedit rc.foxapps.
Add the flowing lines
#! /bin/sh
/usr/sbin/route^add^net, default^ IP address ^1
Save it!
From VT100
At the # chmod^755 rc.foxapps. This will make it an executable file.
****************************************************************
A lack of planning and communication on your
part does not constitute an emergency on my part!
Troy L.Brazell
Duke Energy Field Services
Automation CCST
Mid Continent
Borger, Texas
tlbrazell@xxxxxxxxxxxxxxx
Cell 806-898-4340
Office 806-275-5274
"Troy L Brazell"
<tlbrazell@duke-en To: foxboro@xxxxxxxxxxxxx
ergy.com> cc:
Sent by: Subject: Re: [foxboro] IP
address change
foxboro-bounce@fre
elists.org
01/24/2003 07:03
AM
Please respond to
foxboro
This is the way that I do it.
Lost Network Connection
Ethernet
From VT100
#ifconfig^-a [enter]
Should return a list of network devices. The one you are looking for is=
hme1
Somewhere in the information on this device should be the word UP.
#ifconfig^hme1^down [enter] (hme1 is our logical name, you will need to=
check for your name)
This should shutdown the token-ring card.
#ifconfig^hme1 [enter]
Verify the word UP does not appear in any of the returned information,
#ifconfig^hme1^up [enter]
This should restart the token-ring card.
#ifconfig^hme1 [enter]
Verify that the word UP appears in the returned information.
If all of this doesn't work you will have to reboot the AW.
Do an orderly shutdown with fsck-y.
At #AW5101 halt
At ok turn off the power on the machine and wait several minutes then
restore power and
let the AW reboot from a powered down configuration
***************************************************************
A lack of planning and communication on you=
r
part does not constitute an emergency on my pa=
rt!
Troy L.Brazell
Duke Energy Field Services
Automation CCST
Mid Continent
Borger, Texas
tlbrazell@xxxxxxxxxxxxxxx
Cell 806-898-4340
Office 806-275-5274
=
=20
"Ashley Davey" =
=20
<Ashley.Davey@afpr To: <foxboro@freelists=
.org> =20
od.co.za> cc: =
=20
Sent by: Subject: [foxboro] IP =
address change =20
foxboro-bounce@fre =
=20
elists.org =
=20
=
=20
=
=20
01/24/2003 05:07 =
=20
AM =
=20
Please respond to =
=20
foxboro =
=20
=
=20
=
=20
Hi List
We have 2 x AW51B's and 1 x WP51B on our node which connects to our
corporate network with a router. All three units are equipped with 2nd=
Ethernet cards. I need to change the IP addresses of the 2nd Ethernet
cards and the router.
Except for editing the "/etc/hosts*" files, is there anything else I sh=
ould
change or fix.
Regards
Ashley Davey
Software Engineer
African Products (Pty) Ltd
Gauteng, RSA
Tel : +27 11 458 5342
Fax : +27 11 458 5343
WARNING: This e-mail is being sent from African Products (Pty) Limited,=
and
is intended for the addressee named above. Any unauthorised use or
interception of this e-mail is illegal. The e-mail message or its
attachments may contain confidential or privileged information and may =
not
be copied, forwarded or disclosed to any unauthorised person. If you ar=
e
not the named addressee (or person responsible for forwarding the e-mai=
l to
the addressee) please notify us immediately via return e-mail and destr=
oy
the copy you have received. Save for bona fide company matters, African=
Products (Pty) Limited accepts no responsibility for the opinions or th=
e
content in this e-mail or its attachments.
_______________________________________________________________________=
This mailing list is neither sponsored nor endorsed by Invensys Process=
Systems (formerly The Foxboro Company). Use the info you obtain here at=
your own risks. Read http://www.thecassandraproject.org/disclaimer.html=
foxboro mailing list: http://www.freelists.org/list/foxboro=
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djo=
in
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dlea=
ve
=
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts: