Re: [foxboro] IP address change


This is the way that I do it.
Lost Network Connection
                                 Ethernet
From VT100
#ifconfig^-a [enter]
Should return a list of network devices. The one you are looking for is=

                         hme1
Somewhere in the information on this device should be the word UP.
#ifconfig^hme1^down [enter] (hme1 is our logical name, you will need to=

                         check for your name)
This should shutdown the token-ring card.
#ifconfig^hme1 [enter]
Verify the word UP does not appear in any of the returned information,
#ifconfig^hme1^up [enter]
This should restart the token-ring card.
#ifconfig^hme1 [enter]
Verify that the word UP appears in the returned information.
If all of this doesn't work you will have to reboot the AW.
Do an orderly shutdown with fsck-y.
At #AW5101 halt
At ok turn off the power on the machine and wait several minutes then
                         restore power and
           let  the AW reboot from a powered down configuration

      ***************************************************************
                            A lack of planning and communication on you=
r
                         part does not constitute an emergency on my pa=
rt!

                                           Troy L.Brazell
                                     Duke Energy Field Services
                                          Automation CCST
                                           Mid Continent
                                           Borger, Texas
                                     tlbrazell@xxxxxxxxxxxxxxx
                                       Cell     806-898-4340
                                        Office 806-275-5274


                                                                       =
                                            =20
                    "Ashley Davey"                                     =
                                            =20
                    <Ashley.Davey@afpr       To:     <foxboro@freelists=
.org>                                       =20
                    od.co.za>                cc:                       =
                                            =20
                    Sent by:                 Subject:     [foxboro] IP =
address change                              =20
                    foxboro-bounce@fre                                 =
                                            =20
                    elists.org                                         =
                                            =20
                                                                       =
                                            =20
                                                                       =
                                            =20
                    01/24/2003 05:07                                   =
                                            =20
                    AM                                                 =
                                            =20
                    Please respond to                                  =
                                            =20
                    foxboro                                            =
                                            =20
                                                                       =
                                            =20
                                                                       =
                                            =20




Hi List

We have 2 x AW51B's and 1 x WP51B on our node which connects to our
corporate network with a router.  All three units are equipped with 2nd=

Ethernet cards.  I need to change the IP addresses of the 2nd Ethernet
cards and the router.

Except for editing the "/etc/hosts*" files, is there anything else I sh=
ould
change or fix.

Regards



Ashley Davey
Software Engineer
African Products (Pty) Ltd
Gauteng, RSA
Tel : +27 11 458 5342
Fax : +27 11 458 5343

WARNING: This e-mail is being sent from African Products (Pty) Limited,=
 and
is intended for the addressee named above. Any unauthorised use or
interception of this e-mail is illegal. The e-mail message or its
attachments may contain confidential or privileged information and may =
not
be copied, forwarded or disclosed to any unauthorised person. If you ar=
e
not the named addressee (or person responsible for forwarding the e-mai=
l to
the addressee) please notify us immediately via return e-mail and destr=
oy
the copy you have received. Save for bona fide company matters, African=

Products (Pty) Limited accepts no responsibility for the opinions or th=
e
content in this e-mail or its attachments.



_______________________________________________________________________=

This mailing list is neither sponsored nor endorsed by Invensys Process=

Systems (formerly The Foxboro Company). Use the info you obtain here at=

your own risks. Read http://www.thecassandraproject.org/disclaimer.html=


foxboro mailing list:             http://www.freelists.org/list/foxboro=

to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djo=
in
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dlea=
ve



=


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: