Re: [foxboro] IDP10-A

Under one of the menus in IFDC "Calibrate I beleive" you can reset the xmtr
to its factory defaults.  It would be safer to do this offline with a laptop
and PC20 or something if you have it available.

Dale Gillis
Stora Enso PortHawkesbury Ltd
Inst Tech

----- Original Message ----- 
From: "Bismarck Alban" <balban@xxxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Tuesday, April 20, 2004 6:21 PM
Subject: [foxboro] IDP10-A


>
> Hi List
>
> A new IDP10-AF1B01F, with selt - B350E51
> was connected to 24V DC power source, it show a 0.000 (in H20) in the
> display, the altern display (ENTER) show :
> 1.05 IASPT-A.
> while i go inside the configuration menu, sometimes (ramdomly) appears a
> BADKEY message.
> The measuring read remain at 0.000 (also the 4-20mA output) even if there
> are pressure applied at high side (why?).
> Is it possible to make a factory reset with jumpers or any way? any
> suggestion?
>
> thanks
>
> Bismarck Albán
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: