Re: [foxboro] ICCDRVR.tsk - GET script problem

Dimitris Legakis wrote:
> I would like to ask you about a strange problem we have faced while working 
> with the iccdrvr.tsk.
> 
> We are trying to extract the “DESCRP” parameter of all compounds that begin 
> with “12”. However, when we run the appropriate script, the file that is 
> generated starts increasing endlessly. The script execution never ends 
> unless we interrupt it (pressing Ctrl+C). After that, if we check the 
> created file that should contain all compounds:blocks that begin with “12” 
> we see that compounds and blocks appear MANY times instead of one.
> 
> Bear in mind that also when we tried to run the save_all_cp script for the 
> backup, we had to interrupt the procedure because the save_ascii was 
> creating a file that would never stop increasing (we stopped it at 128MB 
> while normally it is more or less 1MB!).

Sounds like a bug. The iccdrvr.tsk should under no circumstances fill 
the disk.

Regards,

-- 
Sascha Wildner
erpicon Software Development GmbH
Neusser Str. 724-726
50737 Köln
Germany

Phone: +49 221 9746089
Fax:   +49 221 9746099
eMail: swildner@xxxxxxxxxx
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: