Re: [foxboro] I/A V8.0 Rev B software installation on Stand Alone System

dear all,

what if i install I/A V8 on normal dell PC. what is the implication.

thanks in Advance,

Regds,
Imran Butt

On 8/17/05, tom.vandewater@xxxxxxxxxxxxxx <tom.vandewater@xxxxxxxxxxxxxx> w=
rote:
> Thanks for the info Russ!
> Tom
>=20
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Boulay, Russ
> Sent: Tuesday, August 16, 2005 2:50 PM
> To: 'foxboro@xxxxxxxxxxxxx'
> Subject: Re: [foxboro] I/A V8.0 Rev B software installation on Stand
> Alone System
>=20
> Tom,
> Only qualified fiber NIC we currently endorse for V8.x is:
> P0972WD which translates to an Allied Telesyn   AT-2701FX/MT-001
>=20
> We update drivers as well for these NICs per our software install
> process.
>=20
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of tom.vandewater@xxxxxxxxxxxxxx
> Sent: Tuesday, August 16, 2005 2:07 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] I/A V8.0 Rev B software installation on Stand
> Alone
> System
>=20
> Okay Alex. =3D3D20
> You are very succinct but your answer makes me ask more questions! =3D3D2=
0
> Where can I find a list of the ones that are supported?
> Also the other question:
> Is there any magic being employed in the firmware of the NIC's?
>=20
> Thanks,
> Tom
>=20
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Johnson, Alex P (IPS)
> Sent: Tuesday, August 16, 2005 11:31 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] I/A V8.0 Rev B software installation on Stand
> Alone System
>=20
> Re: Will "any" fiber High Speed Ethernet NIC work?
>=20
> No.
>=20
> Regards,
> =3D3D20
> Alex Johnson
> Invensys Systems, Inc.
> 10707 Haddington
> Houston, TX 77063
> +1 713 722 2859 (voice)
> +1 713 932 0222 (fax)
> +1 713 722 2700 (switchboard)
> alex.johnson@xxxxxxxxxxxxxxxx
> I hope to see you at the Invensys Process System User Group meeting
> October
> 3-6 in Houston, TX -=3D3D20
> www.invensys.com/usergroup2005
>=20
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of tom.vandewater@xxxxxxxxxxxxxx
> Sent: Tuesday, August 16, 2005 4:13 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] I/A V8.0 Rev B software installation on Stand
> Alone
> System
>=20
> Russ,
>        The need for two NIC's in a MESH connected AW/WP brings up
> another question.  Is there any magic being employed in the firmware of
> the NIC's or will any COT high speed Ethernet adapter work.  The NIC's
> in our 7.11 XPAW's are 3-Com 3C905C compatible but are RJ-45 twisted
> pair.  We plan to use all fiber MTRJ ports in the blades of our chassis
> switches and it makes sense to use a fiber NIC with MTRJ so they don't
> have to go through any media converters.  Will "any" fiber High Speed
> Ethernet NIC work?  Thanks in advance.
>=20
> Tom VandeWater
> Control Systems Developer/Analyst
> Dow Corning Corporation
> Carrollton, KY   USA
>=20
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Boulay, Russ
> Sent: Tuesday, August 16, 2005 7:06 AM
> To: 'foxboro@xxxxxxxxxxxxx'
> Subject: Re: [foxboro] I/A V8.0 Rev B software installation on Stand
> Alone System
>=20
> Imran...
>=20
> First,
> To install V8.x on a standalone system there is a requirement that both
> ethernet NIC cards be present. Unlike previous versions of I/A on XP/NT,
> V8.x requires dual ethernet for the Mesh Network and then the software
> install creates intermediate drivers for Redundant Mesh operation.
> System bootup is looking for the existence of the dual NICs plus the
> intermediate NIC references in order to function correctly.
>=20
> Second,  what P-code station are you attempting to load this software
> on?
>=20
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Imran Butt
> Sent: Thursday, August 16, 2001 3:22 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] I/A V8.0 Rev B software installation on Stand Alone
> System
>=20
> Dear All,
> =3D3D3D20
>=20
> We are installing the I/A Version 8.0 Rev B software on stand alone PC
> for
> engineering purpose but when system restarted after the completing the
> installation it almost hangs up and a windows popup near the task bar is
> appear to inform "System Virtual Memory too Low" although we have 512
> RAM in
> the system. There is only exceed in running in the taskbar and there is
> no
> window open for "FoxView".
>=20
> =3D3D3D20
>=20
> In our configuration we install the LoopBack adaptor for the stand alone
> but
> in MI "B0700BR_B PW370.pdf" "B0700BR-Rev B" on page 36 it says,
>=20
> =3D3D3D20
>=20
> "I/A Series V7.x software only: To configure a Model P92 Windows XP
> Workstation as a stand-alone station (such as an AW70CP not connected to
> a
> network), I/A Series software installation still prompts you to select
> the
> network adapter that I/A Series software will use. In the dialog box
> that
> gives you this choice, select the "Microsoft Loopback Adapter" if this
> V7.x
> station is to be a stand-alone station."
>=20
> =3D3D3D20
>=20
> It means stand alone is supported only upto Version 7 and not in Version
> 8.
>=20
> =3D3D3D20
>=20
> Can any one help me in Installing the I/A Version 8.0 Rev B as stand
> alone?
>=20
> =3D3D3D20
>=20
> =3D3D3D20
>=20
> Best Regards,
>=20
> Imran Butt
>=20
> System Engineer
>=20
> IIImanstock Engineering Company (Pvt.) Ltd.
>=20
> 39-42 Farid Chambers, Abdullah Haroon Road
>=20
> Karachi - 74400, Pakistan
>=20
> Cell: +92-300-2353458
>=20
> TEL: +92-21-5678952, 5678953, 5673145
>=20
> FAX: +92-21-5682576
>=20
> E-mail:  <mailto:imran.butt@xxxxxxxxxxxxxxxxx>
> imran.butt@xxxxxxxxxxxxxxxxx=3D3D3D20
>=20
> URL:  <http://www.manstock-engg.com/> http://www.manstock-engg.com
>=20
> =3D3D3D20
>=20
>=20
>=20
> =3D3D3D20
> =3D3D3D20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =3D3D3D20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         =3D3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3D3Djoin
> to unsubscribe:      =3D3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3D3Dleave
> =3D3D3D20
>=20
> =3D3D3D20
> =3D3D3D20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =3D3D3D20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         =3D3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3D3Djoin
> to unsubscribe:      =3D3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3D3Dleave
> =3D3D3D20
> =3D3D20
> =3D3D20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =3D3D20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         =3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin
> to unsubscribe:      =3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave
> =3D3D20
>=20
> =3D3D20
> =3D3D20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =3D3D20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         =3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin
> to unsubscribe:      =3D3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave
> =3D3D20
> =3D20
> =3D20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =3D20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         =3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
> to unsubscribe:      =3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
> =3D20
>=20
> =3D20
> =3D20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =3D20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         =3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
> to unsubscribe:      =3D
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
> =3D20
>=20
>=20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>=20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
>=20
>
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: