Yes you can add FBM's by just configuring the ECB's, there is no need to do a sysdef. Marc L. Hunter Vice President - Engineering and Services Synergy Systems Inc. 1982 Ohio Street Lisle, IL 60563 +1 (630) 724-1960 hunter@xxxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jamie Smith Sent: Friday, June 22, 2012 8:06 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] I/A FBM addition Hi all, I've been out of the I/A loop for about 2 years and have suffered some atrophy. I'm thinking about adding some additional I/O in an upcoming project. Can you add FBM's to a CP without a new sysdef, day 0, etc..? Jamie Smith EN ENGINEERING Project Specialist Phone 1-217-424-6923 Cellular 1-217-454-9892 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave