Re: [foxboro] Hypothetical alarming question

I think the priority 5 alarm traffic can be eliminated by setting the
CINHIB paramater in each offending compound to 5. Maybe the suggestion
by Alex that trying group 0 is worth playing with.
Regards,
          Alan Armour

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of brad.s.wilson@xxxxxxxxxxxxxx
Sent: Tuesday, 14 February 2006 9:54 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Hypothetical alarming question


I'll toss in my 2-cents, hopefully without belaboring this issue.  If
all 5 priority levels are being used for something in the AM, then I
can't see any way to have an analog "alarm" be a non-alarm trigger with
out using the inhibit function in some way.  (State inputs, CIN,
obviously can turn off the SAO and still function without alarming.)
There are some rather round-about methods, such as using a CALC block or
a DGAP block.  Could you create an AM that isn't linked to any
workstations and send the "alarms" there?

Brad Wilson
Process Control Engineer
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
__________________________________________________________________________________
                                DISCLAIMER

The contents of this electronic message and any attachments are intended only
for the addressee and may contain legally privileged, personal, sensitive or
confidential information. If you are not the intended addressee, and have
received this email, any transmission, distribution, downloading, printing or
photocopying of the contents of this message or attachments is strictly
prohibited. Any legal privilege or confidentiality attached to this message and
attachments is not waived, lost or destroyed by reason of delivery to any
person other than intended addressee. If you have received this message and
are not the intended addressee you should notify the sender by return email and
destroy all copies of the message and any attachments.  Unless expressly
attributed, the views expressed in this email do not necessarily represent the
views of the company.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: