Re: [foxboro] How to Change NIC Setting on Unix Box - Solaris 5

With the le drivers in 51A, 51B and 51C workstations, you can't set
speed and duplex.  The le driver is 10mb/s, half-duplex only. The
adapter does not support autonegotiation.

There are sbus hme cards available for these workstations that work fine
under Solaris 2.5.1, but I haven't tried either of them in an I/A
system:
X1056 (501-2655) - uses be driver
X1059A (501-2919) - uses hme driver

Regards,

Kevin FitzGerrell

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Khudhair, Waleed K
Sent: Monday, February 26, 2007 4:52 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] How to Change NIC Setting on Unix Box - Solaris 5

Rene and Terry, great thanks for your help. Unfortunately ndd does not
work with interface le. Any suggestion? =3D20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: