Well, here's the problem; I just don't know. I messed around with this stuff a while ago after blowing away the meta DB partition of a disk. I got my disk into a readable state, but didnt go much further. Did remember where this meta db utility set was. Also remember that the devices shown as /dev/md/... are the meta DB versions of the disk addresses. Sorry I cant be more help. William C. Ricker FeedForward, Inc. Marietta, GA, USA wcricker@xxxxxxxxxxxxxxx 770-426-4422 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of stan Sent: Wednesday, August 28, 2002 12:06 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] How can I get the status of a RAID drive on a 51D? On Wed, Aug 28, 2002 at 11:22:37AM -0400, wcricker wrote: > > Executables are in : /usr/opt/SUNWmd/sbin/ > > Man pages at : /usr/opt/SUNWmd/man > eg.: > man -M /usr/opt/SUNWmd/man metadb re you certain this works for the external hardware RAID units? This looks like the stuff we use for the mirrored drives. The edvices on the machine withe RAID look like this: AW0102# bdf Filesystem kbytes used avail capacity Mounted on /dev/dsk/c1t0d0s0 65759 32750 26439 56% / /dev/dsk/c1t0d0s6 887503 545972 252781 69% /usr /dev/dsk/c1t0d0s4 44159 14690 25059 37% /var /dev/dsk/c1t0d0s7 15579552 419924 13601678 3% /opt Rather than: AP0550# bdf Filesystem kbytes used avail capacity Mounted on /dev/md/dsk/d0 49855 20929 23946 47% / /dev/md/dsk/d4 822151 453894 286047 62% /usr /dev/md/dsk/d2 37927 5803 28334 17% /var /dev/md/dsk/d5 2719925 671055 1776880 28% /opt Which is from a unit with mirrored drives. I don't _beleive_ that the external hardware RAID boxes us metadevices, although I am certainly willing to be educated in the error of my ways. -- "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." -- Benjamin Franklin _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave