Re: [foxboro] HP895CXI on LEGACY V6.3
- From: "Bakke, Richard A" <rabakke@xxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Thu, 26 Jun 2003 08:51:05 -0700
Thierry,
One possibility is that the printer needs to be specifically designated
as a PCL3 printer in the "/etc/printscreen.options" file. With printer LP36
(an HP Deskjet 890C) attached to the parallel port, our AW51B's
/etc/printscreen.options file looks like this:
:LPxx PCL3
:LP36 PCL3
I also think you need the "/etc/printscreen.printers" file. Ours looks
like this:
:HP680 PCL3 DRAFT RESOLUTION300 LANDSCAPE STD_COLORS_ONLY
DELTA_RLE_COMPRESSION REAL_SCALE
:HP870 PCL3 NORMAL STD_AND_NOMINAL_COLORS DELTA_RLE_COMPRESSION
:HP870P PCL3 NORMAL PORTRAIT STD_AND_NOMINAL_COLORS DELTA_RLE_COMPRESSION
Rich Bakke
Longview Fibre Co.
Thierry BRIENT wrote:
> Hello,
>
> After an realease update V6.1.1 to 6.3 on a WP (AW51B), the printscreen
> don't work properly. Only 3 to 5 cm are printed and the printing restart
> again and again.
>
> The procedure was the following :
> - V6.2 installation with the day 0 disk (KO 175 SW-B)
> - Site commit installation
> - V6.3 realease update installation (K0 200 TZ-A)
> - Printer installation (K 0173 HX-C)
>
> The result was the following
> - printer ok on lpstast
> - ASCII file printing test ok
> - Printscreen test failed (I am not able to cancel this job)
>
> Thank you for your help
>
> Regards
>
> Th. BRIENT
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- References:
- [foxboro] HP895CXI on LEGACY V6.3
- From: Thierry BRIENT
Other related posts:
- » Re: [foxboro] HP895CXI on LEGACY V6.3
- [foxboro] HP895CXI on LEGACY V6.3
- From: Thierry BRIENT