Re: [foxboro] HOW TO CONNECT FBP10 TO FCP270

Imran,

My best advice would be to configure one of the old CPs on to a spare
AW.  Commit this with a simple sysdef and then EEPROM the FBPs.  If
this is not practical, I suspect you could get your local Foxboro
field service office to do it for you.

Are you re-starting a plant that has been shut down for some time?

Regards,

Kevin FitzGerrell

On 9/26/07, Imran Waheed Butt <butt.imran@xxxxxxxxx> wrote:
> Dear Russ & List,
> The both the old AWs are dead and are removed so, we can't update the EEPROM
> by connecting the old system.
> Any other method.
>
> Thanks and Best Regards.
> Imran Butt,
> System Engineer.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: