Re: [foxboro] HLBL problem

Problem solved....There was a very long comment line just before the REPEAT
UNTIL. Allthough the line was in between {...} it must have caused the
problem, cause after deleting this line I could compile without errors !!!
The code was originaly written in VT100 using vi, then over the years
edited a couple of times using wordpad, never had any problems, but I guess
my collegue added the comment line using word or something, he only
metioned the WAIT 1; so I didn't check for new comment lines....anyway
problem solved.
Many thanks for the usefull suggestions.

Merry Xmas and happy newyear to you all, (I can leave on holiday

Dirk Pauwels - DCS/MOC coordinator
Engineering dept.
Hexion Specialty Chemicals
E mail: dirk.pauwels@xxxxxxxxxx
T.  +32.(0)3.570.95.97
F.  +32.(0)3.570.16.09
Mob. +32.(0)497.428.300


Does the problem have to do with <CR><LF> being at the end of lines
where only <LF> is expected (or vice versa)?

Sascha

--

eMail:  swildner@xxxxxxxxxx






 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: