Re: [foxboro] Get information's from System Monitor

Thank you Russ, I believe you may have found the proverbial needle in
the haystack with the possibility that FoxMass leaves REMV/REMD running
after collecting data for their Quarterly FoxWatch Reports; no one here
on-site even knows what REMV/REMD are so I doubt it is us.  However ...
once I can understand, but this happens often; very possibly once a
Quarter.  Hmmmmmmmm...  Can it be possible they always or often leave it
running?  I offered this as a suggestion to FoxMass and am waiting to
hear their response to this mystery.

My thanks also to Terry Doucet's suggestions...

As usual, the help received from this list has been educational and
invaluable...


Joseph M. Riccardi
DCS Services - Industrial Process Control
 
North-Central Office (OH, PA, MI, IN, WV area)
South-East Office (FL, GA, AL, SC, NC area)

www.eRiccardi.com
 
386-441-0250               Home Office
386-451-7607               Florida Cell
440-725-4025               Ohio Cell

Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A.
Adams

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Boulay, Russ
Sent: Saturday, November 11, 2006 10:37 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Get information's from System Monitor

If SMDH will not open because of "SMDH Currently Active on this screen"
and there is no active window visible, then there is a good possibility
that REMV/REMD was left running. When REMD/REMV is started to execute
and gather counters remotely from FoxMass or on site SMDH local
capabilities are prevented on the local machine so no one will interrupt
or reset the counters while being collected. If that process is left
running...then local SMDH is prevented with the message you speak of.
ps -eaf |grep remd or remv ...kill process id if you are sure know one
is collecting counters.
________________________________

From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Joseph M. Riccardi
Sent: Fri 11/10/2006 9:49 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Get information's from System Monitor



Folks, 

Same subject (System Monitor messages); different line of questioning
... 

We have System Monitors that periodically stop running (viewed as gray
in the System Manager display), and one that periodically will not open
the Sys/Sys_Mgmt (System Manager) display (get error "cannot
open/access.  Get 
error - SMDH: Currently active on this Station" but it is not).   Not 
getting any where with Foxboro Service so...  Will the System Manager
trap/report these types of messages?  Hate to waste the time with log
files if this is something that will not even be reported. 

Thanks. 


Joseph M. Riccardi, Inc. 
DCS Services - Industrial Process Control 
  
North-Central Office (OH, PA, MI, IN, WV Area) South-East Office (FL,
GA, AL, SC, NC Area) 
  
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A.
Adams 
  

-----Original Message----- 
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On 
Behalf Of Hegewisch, Dirk 
Sent: Thursday, November 09, 2006 7:09 AM 
To: foxboro@xxxxxxxxxxxxx 
Subject: [foxboro] Get information's from System Monitor 

Hi List. 
  
Does anybody know how to get information's from the system monitor into
a 
file. 
Is there a possibility to get a report-File for a Station or to get a
single 
Information? 
  
For Example: 
I would like to get automatically the PERIPHERAL COUNTERs each day from
all 
Modbus Stations To get an Statistic over the Error counters. 
  
Regards 
 Dirk 
  
  
_______________________________________________________________________ 
This mailing list is neither sponsored nor endorsed by Invensys Process 
Systems (formerly The Foxboro Company). Use the info you obtain here at
your 
own risks. Read http://www.thecassandraproject.org/disclaimer.html 
  
foxboro mailing list:             http://www.freelists.org/list/foxboro 
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join 
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave 
  


  
_______________________________________________________________________ 
This mailing list is neither sponsored nor endorsed by Invensys Process 
Systems (formerly The Foxboro Company). Use the info you obtain here at 
your own risks. Read http://www.thecassandraproject.org/disclaimer.html 
  
foxboro mailing list:             http://www.freelists.org/list/foxboro 
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join 
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave 
  


-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: