Re: [foxboro] Get information's from System Monitor

If SMDH will not open because of "SMDH Currently Active on this screen" and 
there is no active window visible, 
then there is a good possibility that REMV/REMD was left running. When 
REMD/REMV is started to execute and gather counters remotely from FoxMass or on 
site SMDH local capabilities are prevented on the local machine so no one will 
interrupt or reset the counters while being collected. If that process is left 
running...then local SMDH is prevented with the message you speak of.
ps -eaf |grep remd or remv ...kill process id if you are sure know one is 
collecting counters.
________________________________

From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Joseph M. Riccardi
Sent: Fri 11/10/2006 9:49 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Get information's from System Monitor



Folks, 

Same subject (System Monitor messages); different line of questioning ... 

We have System Monitors that periodically stop running (viewed as gray in 
the System Manager display), and one that periodically will not open the 
Sys/Sys_Mgmt (System Manager) display (get error "cannot open/access.  Get 
error - SMDH: Currently active on this Station" but it is not).   Not 
getting any where with Foxboro Service so...  Will the System Manager 
trap/report these types of messages?  Hate to waste the time with log files 
if this is something that will not even be reported. 

Thanks. 


Joseph M. Riccardi, Inc. 
DCS Services - Industrial Process Control 
  
North-Central Office (OH, PA, MI, IN, WV Area) 
South-East Office (FL, GA, AL, SC, NC Area) 
  
"To give real service you must add something that cannot be bought or 
measured with money; and that is sincerity and integrity." - Donald A. Adams 
  

-----Original Message----- 
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Hegewisch, Dirk 
Sent: Thursday, November 09, 2006 7:09 AM 
To: foxboro@xxxxxxxxxxxxx 
Subject: [foxboro] Get information's from System Monitor 

Hi List. 
  
Does anybody know how to get information's from the system monitor into a 
file. 
Is there a possibility to get a report-File for a Station or to get a single 
Information? 
  
For Example: 
I would like to get automatically the PERIPHERAL COUNTERs each day from all 
Modbus Stations To get an Statistic over the Error counters. 
  
Regards 
 Dirk 
  
  
_______________________________________________________________________ 
This mailing list is neither sponsored nor endorsed by Invensys Process 
Systems (formerly The Foxboro Company). Use the info you obtain here at your 
own risks. Read http://www.thecassandraproject.org/disclaimer.html 
  
foxboro mailing list:             http://www.freelists.org/list/foxboro 
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join 
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave 
  


  
_______________________________________________________________________ 
This mailing list is neither sponsored nor endorsed by Invensys Process 
Systems (formerly The Foxboro Company). Use the info you obtain here at 
your own risks. Read http://www.thecassandraproject.org/disclaimer.html 
  
foxboro mailing list:             http://www.freelists.org/list/foxboro 
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join 
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave 
  


-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: