Re: [foxboro] General Instrument Question
- From: "Barber William R" <William.Barber@xxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 8 Aug 2007 06:14:53 -0700
Coriollis mass meters typically can output density as well as flow.
ABB has info on their website
cordially,
William Barber=20
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Balmer, Robert D.
Sent: Wednesday, August 08, 2007 6:08 AM
To: Foxboro DCS Mail List
Subject: [foxboro] General Instrument Question
I am involved on a project in China and there is a control engineer over
there saying they can use a mass flow meter to measure density. I have
never heard of such a thing, has anyone out there in control world seen
such an application. If so could you point me to some literature on how
it is accomplished?
Regards,
Robert Balmer
Senior Applications Analyst/Programmer
ISA CCST
319 463 2206
Robert_Balmer@xxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
