Re: [foxboro] GEGSM

You can get questions about the GE GSM interface by sending a note to the
I/A Series Device Integration group. The e-mail address is:

iasdi@xxxxxxxxxxxxxxxx


Give it a try.

Regards,
 
Alex Johnson
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77063
+1 713 722 2859 (voice)
+1 713 932 0222 (fax)
+1 713 722 2700 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
 
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Abdulrahman, Wael
Sent: Wednesday, July 13, 2005 3:15 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: [foxboro] GEGSM

dear all,

I would like to ask about the configurator application program of FOXBORO
(Foxboro GSM Configurator (FGC)) to produces files that are then installed
in the AW for facilating the communication with GEGSM turbine driver.

thank you

Wael Abdulrahman

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: