Re: [foxboro] GDEV ignore limits listing
- From: "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 1 Aug 2007 10:47:38 -0400
As I was saying before I so rudely interrupted myself.
As with Corey, I'd use getpars. It's very good for non-STRING data. If
you need STRING parameters, you need to use the ICC Driver Task or one
of the 3rd party products on the market.
Regards,
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: Johnson, Alex P (IPS) =
Sent: Wednesday, August 01, 2007 9:41 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: RE: [foxboro] GDEV ignore limits listing
As with Corey, I'd use getpars. It's very good for non-STRI
Regards,
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Corey R Clingo
Sent: Wednesday, August 01, 2007 9:09 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] GDEV ignore limits listing
This command
getpars -tGDEV -UXKCP18 -mAVLLM1:%2d -mIGNLM1:%2d -mAVLLM2:%2d =
-mIGNLM2:%2d -n
produces the following output on one of my CPs:
BLOCK-NAME AVLLM1 IGNLM1 AVLLM2 IGNLM2
AV20CT2 0 1 0 1
XV20CT2 0 1 0 1
XV1260C3 1 0 1 0
XV1260C4 1 0 1 0
XV1260C15 0 0 0 0
XV1266C3 0 0 0 0
XV1266C4 0 0 0 0
XC1261AP1 0 1 1 0
XC1261BP1 0 1 1 0
XV1261AD1 1 0 0 1
XV1261P1 0 1 0 1
XL1260AR2B 1 0 1 0
XV1260AR7 1 0 1 0
XV1260AR8 1 0 1 0
XV1260AR10 1 0 1 0
XV1260AR11 1 0 1 0
It's not a far leap to from there to use awk, Excel, or the neural net =
between one's ears to figure out what you want, This only think this
does =
not tell you is whether you have limits configured, but not connected to
other blocks or directly to I/O (like happens to me when I set one up
for =
simulation and forget to go back and connect it :( )
=
Corey Clingo
BASF Corporation
"Moore, Kenneth, Celanese/US" <ken.e.moore@xxxxxxxxxxxx> =
Sent by: foxboro-bounce@xxxxxxxxxxxxx
08/01/2007 08:18 AM
Please respond to
foxboro@xxxxxxxxxxxxx
To
<foxboro@xxxxxxxxxxxxx>
cc
Subject
[foxboro] GDEV ignore limits listing
Hi List,
Novice here, so be gentle.
I took a quick look through the archives, but didn't find what I was
looking for.
I need to generate a list of all GDEV blocks that have limits
configured, but are ignored.
I assume I need to use the OMGET, I'll have to read up on that topic.
=3D20
Regards,
Ken Moore
Process Controls Specialist
Celanese Emulsions
Enoree, SC 29335
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=
=
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=
Confidentiality Notice:
The information contained in this electronic message and any attachment(s) =
to this message are intended for the exclusive use of the recipient(s) and =
may contain confidential, privileged or proprietary information. If you are=
not the intended recipient, please notify the sender immediately, delete a=
ll copies of this message and any attachment(s). Any other use of the E-Mai=
l by you is prohibited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
