Stan: You are in control of what you make the P79 or P81 hardware into. You can make it a "WP" or "AW" or "AP" depending on how you configure your S20A software license: p/n S20A is the licence for P79,P80,P81 as stated in the description on BuyAutomation.com : VERSION: For I/A Series V7x w/P79,P80,P81 Processors For any workstation there are two(2) steps: 1) Pick the v7.x hardware box (P79, P80 or P81) 2) Pick the v7.x software (S20A) I hope this clears things up. Peter Bruley Senior Systems Service Specialist -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of stan Sent: Thursday, July 14, 2005 2:12 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] "G" boxes as WP's ? OK, I'm sold. Now if I can just cofigure the G's as WP's,... Oh wait that'w where this atrted, weve gone full circle here :-) -- U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong Terror - New York Times 9/3/1967 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave