Re: [foxboro] Foxdraw

It may be posible using a combination of "move" and "rotate" in Configure
objects>Dynamic Update> and then select move Horizontal (or vertical) and
rotate... if there is a problema you can "group" the figura and to the group
add the move movement and to the "gate" just the rotate for example...
Good luck

Jorge Jimenez S




2006/11/28, Terry Currie <TCurrie@xxxxxxxxxx>:
>
> Is it possible to show a pivot movement
> e.g. A gate secured at one end and moving 45 deg
> Terry
>
>
>                            IMPORTANT NOTICE !
> This E-Mail transmission and any accompanying attachments may contain
> confidential information intended only for the use of the individual or
> entity named above. Any dissemination, distribution, copying or action
> taken
> in reliance on the contents of this E-Mail by anyone other than the
> intended
> recipient is strictly prohibited and is not intended to, in anyway, waive
> privilege or confidentiality. If you have received this E-Mail in error
> please
> immediately delete it and notify sender at the above E-Mail address.
>
> Agrium uses state of the art anti-virus technology on all incoming and
> outgoing E-Mail. We encourage and promote the use of safe E-Mail
> management
> practices and recommend you check this, and all other E-Mail and
> attachments
> you receive for the presence of viruses. The sender and Agrium accept no
> liability
> for any damage caused by a virus or otherwise by the transmittal of this
> E-Mail.
>                        IMPORTANT NOTICE
>
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>


-- 
-----------------------------
jorgejs76@xxxxxxxxx
http://www.geocities.com/jorgejs76/main.html


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: