Re: [foxboro] FoxCAE 4.0

Imran,
Here is something you can do to see if you can open the example database 
that comes with FoxCAE.

Before you run FoxCAE, you should examine the directory structure in which 
it is installed.  If it resides in the directory c:\FoxCAE, there should 
be an EXAMPLE subdirectory underneath the FoxCAE directory.  Create a new 
directory under the FoxCAE directory, and copy the contents of the EXAMPLE 
directory into the new subdirectory that you have created.

Start FoxCAE, and the Select button should be enabled.  Pick Select, and 
then select the new directory that you just created. 

If you are able to open this database you can then go to the editing 
windows for control logic.

Stan M. Ruth, P.E.
Process Control Engineer
Huntsman 


 




"Bakke, Richard A" <rabakke@xxxxxxxxxxxxx>
Sent by: foxboro-bounce@xxxxxxxxxxxxx
02/25/2005 01:17 PM
Please respond to foxboro

 
        To:     foxboro@xxxxxxxxxxxxx
        cc: 
        Subject:        Re: [foxboro] FoxCAE 4.0


 
Imran,
    Well, I'm not too sure what the problem is.  But when I first open up
FoxCAE 4.0 on my PC, I have three buttons enabled:  Select, Help, and
Cancel.  The "Select" button must first be used to select a valid
subdirectory under the FOXCAE40 directory, if one is not preselected
already.  If this subdirectory is empty, you should then have the 
"Install"
and "Load" buttons enabled.  If the subdirectory already has a FoxCAE 4.0
project in it, you should just have to go through the picking "Password",
picking  "User ID" routine to get the "OK" button enabled.

    Other than that, perhaps someone else has some suggestions, since I 
may
be forgetting something from a brand new install.   Or you may need to 
call
TAC.

Hope it works for you,
Rich Bakke
Longview Fibre Co.


Imran Butt wrote:
Thanks Mr. Richard, The porblem is that all buttons are disabled Except 
Help
&Cancel. Disabled Buttons are Check Pack Save Import Install Load These
buttons are disabled. Then how could I use these buttons. Please advice 
some
thing else. Thanks &Regards, Imran Butt System Engineer. ----- Original
Message ----- From: "Bakke, Richard A" <rabakke@xxxxxxxxxxxxx>[1] To:
<foxboro@xxxxxxxxxxxxx>[2] Sent: Friday, February 25, 2005 9:35 PM 
Subject:
Re: [foxboro] FoxCAE 4.0 FoxCAE 4.0 does not use anything in the "User ID"
nor in the "Password" fields. First Time FoxCAE 4.0: 1. Create new empty
folder under the directory FOXCAE40 2. Start the FoxCAE 4.0 program. 3.
Clickthe "Select" button and select your new folder. 4. Click the 
"Install"
button and "Yes" and then select the "FOXCAE40/Example" directory, 
followed
by "OK". 5. Cursor goes to "Plant Description" -- enter in a description 
of
your project. 6. Click on "Password" -- do not enter anything. 7. Click on
"User ID" -- it then asks for the Version -- select version and "OK", then
"OK" to the "All Tables Updated" message. 8. Then select the "OK" button,
andyou're in to the project to begin work. Subsequent FoxCAE 4.0: 1. Start
the FoxCAE 4.0 program. 2. Select your folder, unless it is already
pre-selected. 3. Click on the "Password" 4. Click on the "User ID" 5. 
Click
the "OK" button, and you're in. Rich Bakke Longview Fibre Co. Imran Butt
wrote: Hi every one, I install FoxCAE 4.0 first time, when I open it, it 
ask
for user ID and Password and all buttons are disabled except "cancel and
help". Can any one help me how to get in the FoxCAE database first time 
and
how to create new account. I tried User ID : Admin and Password : password
but to use I also tried many other combinations too. Regards, Imran Butt
System Engineer.
_______________________________________________________________________ 
This
mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. Read http://www.thecassandraproject.org/disclaimer.html[3] foxboro
mailing list: http://www.freelists.org/list/foxboro[4] to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join[5] to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave[6]
_______________________________________________________________________ 
This
mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. Read http://www.thecassandraproject.org/disclaimer.html[7] foxboro
mailing list: http://www.freelists.org/list/foxboro[8] to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join[9] to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave[10]
_______________________________________________________________________ 
This
mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. Read http://www.thecassandraproject.org/disclaimer.html[11] foxboro
mailing list: http://www.freelists.org/list/foxboro[12] to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join[13] to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave[14] 

--- Links ---
   1 mailto:rabakke@xxxxxxxxxxxxx
   2 mailto:foxboro@xxxxxxxxxxxxx
   3 http://www.thecassandraproject.org/disclaimer.html
   4 http://www.freelists.org/list/foxboro
   5 mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
   6 mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
   7 http://www.thecassandraproject.org/disclaimer.html
   8 http://www.freelists.org/list/foxboro
   9 mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
  10 mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
  11 http://www.thecassandraproject.org/disclaimer.html
  12 http://www.freelists.org/list/foxboro
  13 mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
  14 mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: