Re: [foxboro] FoxApi and visual Basic

It was pointed out - off-list - that AIM*DataLink does have a wrapper for
the reading of values, but you have to use DDE to write using it.

Regards,
 
Alex Johnson
Invensys Process Systems
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (voice)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of chdehedin
Sent: Wednesday, April 20, 2005 4:13 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] FoxApi and visual Basic

It's possible to use FoxApi with visual basic? I think it's possible to
create a DLL in C with FoxApi commands and after use the DLL with Visual
Basic?
 
Christophe DEHEDIN
Software Engineer
 
MONOX INSTRUMENTATION
ZA les alouettes            
BP 24
62055 Saint Nicolas lez Arras CEDEX
Email : christophe.dehedin@xxxxxxxx
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: