Re: [foxboro] Flat Panel to 51B

I have used the NEC 1860NX monitor on about 40 WP51A/B/D's and AW51E's for 
several years now. The symptoms you mention below both indicate the loss of 
the green color gun signal. This problem is as likely to occur in any other 
CRT or LCD monitor.

Probable causes in order of likelihood:
1) Bad video cable, especially the end connectors or adapter causes this 
problem in most cases.
2) Bad monitor.
3) Bad video card in AW51B.


----- Original Message ----- 
From: "BrianLong" <blong@xxxxxxx>
To: "Foxboro" <foxboro@xxxxxxxxxxxxx>
Sent: Friday, February 04, 2005 1:48 PM
Subject: [foxboro] Flat Panel to 51B


>I happen to have an NEC 2060NX and connected it to an AW51B.  The color
> green does not show up.  Any suggestions?  Also, the initial white boot up
> screens are a pink color.  We are running display manager.
> Thanks in advance,
> Brian Long
> Arkansas Kraft
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: