Re: [foxboro] Ferret4.2 FBM200 Data collection problem

If you are talking about getting EEPROM revisions from the FBMs, there was 
a bug in 6.x up to 6.5.1 (at least on my system) where ferret, frev, 
System Management, etc. could not obtain the EEPROM revisions for 
200-series FBMs attached to a CP60.  We tried EEPROM-updating the FCMs and 
the CP itself to no avail.  Older CPs with 100-series FBMs worked fine.

We are now at 6.5.3/7.1.2 and have a newer CP image.  We may have 
EEPROM-updated the FCMs again also.  Whatever we did, it is working now 
(frev and SysMan, anyway).


Corey Clingo
BASF Corporation






<andrew.roberts@xxxxxxxxxxxxxx> 
Sent by: foxboro-bounce@xxxxxxxxxxxxx
09/28/2007 11:15 AM
Please respond to
foxboro@xxxxxxxxxxxxx


To
<foxboro@xxxxxxxxxxxxx>
cc

Subject
Re: [foxboro] Ferret4.2 FBM200 Data collection problem





I had the same problem when running ferret 4.2 on a IA system with 6.2.1
on it, but on a hot system with version 6.5 it worked fine. I asked
Invensys about this and they informed me that it was probably only
tested on a later version and not a version that was as old as 6.2.1.

Sorry I cannot help you anymore

thanks

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Ayman
Sent: 10 September 2007 10:34
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Ferret4.2 FBM200 Data collection problem

Dear Users,
I ran ferret4.2R in four different sits.

In some sits the ferret4.2R  does not collect the FBM200 data .

All sits uses Station AW70 box 6.3 .

I want to know How to solve this problem .

Ayman



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: