Re: [foxboro] Failed GW30

Umm, I forgot to say that it failed red/green and, after placing it in
our spare system, it failed red. Looks like it's truly dead.

Cheers,
Frits.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Boulay, Russ
Sent: Thursday, 15 May 2008 2:08 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Failed GW30

Frits, according to diagnostic guide:

This problem is a hardware fault or a recoverable soft error. The
following steps should be taken to isolate the problem: =3D

The module will reboot. If start-up diagnostics succeed, and the
symptoms do not re-occur, the module is good. =3D


This use to happen on old WP30's when 50 series were first introduced
and a software buffer would fill up with displays coming in to fast fro
the WP30...maybe a similar buffer issue occurred on your MG30 and will
now be good again. Or hardware is beginning to fail

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Schouten, Frits JF
Sent: Wednesday, May 14, 2008 9:53 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Failed GW30

Hello all,
After 12 years+ in service we had a MG30 fail with the following
message:
2008-05-15 12:21:29 C1MG01 Error Protocol EHSS   000145 OS TICK failure
-=3D3D
 NMI Exception 00006C051145
2008-05-15 12:21:29 C1MG01 Error Protocol EHSS   000145 OS TICK failure
-=3D3D
 NMI Exception 00006C051145
2008-05-15 12:21:39 C0AW01 Process =3D3D3D NFD000001 NF8023 -00001 NB
Cable
t=3D3D
est to C1CP01 OK. No response from C1MG01
2008-05-15 12:21:59 C1MG01 Software Manager SYSMON -00024 Memory Dump
Fai=3D3D
led. File name =3D3D3D C1MG01.1

Anyone care to comment on the 'OS TICK failure'?
It almost sound like a heart attack =3D3DE2=3D3D98=3D3DBA


Frits Schouten
NZSteel.



=0A=0ANOTICE - This message and any attached files may contain informatio=
n that is confidential and intended only for use by the intended recipien=
t. If you are not the intended recipient or the person responsible for de=
livering the message to the intended recipient, be advised that you have =
received this message in error and that any dissemination, copying or use=
 of this message or attachment is strictly forbidden, as is the disclosur=
e of the information therein. If you have received this message in error =
please notify the sender immediately and delete the message.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: