Re: [foxboro] FXBAIS vs PI OPC Interface

None for OSI PI. It's either write enable or no write enable per
interface. Of course each tag (C:B.P) is configured as read or write on
a per tag basis.

Jack Easley

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Theobald, Martin
Sent: Wednesday, June 25, 2008 11:57 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FXBAIS vs PI OPC Interface

For systems that allow OSI PI (or even OPC DA/HDA Clients) to write back
to the I/A Series, what options are there for limiting which
Compound:Block.Parameters that can be written to?


Regards,

Martin Theobald

Confidentiality Notice: This email message, including any attachments, =0A=
contains or may contain confidential information intended only for the =0A=
addressee. If you are not an intended recipient of this message, be =0A=
advised that any reading, dissemination, forwarding, printing, copying=0A=
or other use of this message or its attachments is strictly prohibited. If=
=0A=
you have received this message in error, please notify the sender =0A=
immediately by reply message and delete this email message and any=0A=
attachments from your system. 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: