Re: [foxboro] FW: simulation on aw70/cp60

The tool that Mike mentioned is a VPLink tool not an I/A Series tool.


You can accomplish the same thing with either the ICC Driver Task which has
a B0 document or setpars which has a .man file in /opt/fox/bin/tools.


The ICC Driver Task updates both the work file and the CP. Setpars changes
only the CP.


Be very careful if you are using these tools on a live system.



Regards,

Alex Johnson
Invensys
10707 Haddington
Houston, TX 77063
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> 
For the latest information on ArchestrA, go to
www.invensys.com/Archestra.html
<http://www.invensys.com/divisions/Archestra.html> .


        -----Original Message-----
        From:   Nasif, Mohamed [SMTP:Mohamed.Nasif@xxxxxxxxxxxxxx]
        Sent:   Monday, December 23, 2002 9:09 AM
        To:     'foxboro@xxxxxxxxxxxxx'
        Subject:        Re: [foxboro] FW: simulation on aw70/cp60

        Is set-for-sim I/A series standard tool, if not, how can we get
details
        about that.  Thanks.

        Moh. Nasif
        Inst & Controls
        Scotford Complex

        -----Original Message-----
        From: Mike Sullivan [mailto:mike@xxxxxxxxxxxxxxxx]
        Sent: Monday, December 23, 2002 5:40 AM
        To: foxboro@xxxxxxxxxxxxx
        Subject: Re: [foxboro] FW: simulation on aw70/cp60



        Maurice;
        We deliver set_for_sim which does exactly as you require (although
note that
        a block such as GDEV does not have an IOMOPT, rather, alternate
params which
        accomplish your simulation requirements).
        Its companion, unset_for_sim returns the appropriate parameter back
to its
        original state.
        Each operates with your CP's letterbug as its argument.
        Do you have our Release Notes for I/A Series systems?  It's all
clearly
        documented.
        Please let me know and I can email as required.
        Best regards for a Happy Holiday Season,
        Mike
        P.S. I don't know if this is going out to the list, so, please use
        mike@xxxxxxxxxxxxxxxx, or, tech-support@xxxxxxxxxxxxxxxxx




        > We want to establish a setup where we can have blocks turned into
        > simulation mode, and then return to FBMs.
        > We thought to do that by changing the value in IOMOPT, but this is
not a
        > settable parameter.
        > I was under the impression that VPLINK changed the IOMOPT to 2 ,
to go
        > into simulation mode, and then returned it ot 1, when done. can
you advise
        > how this is done.
        >
        >
        > Best Regards,
        >
        > Maurice Moshe
        > Systems Manager
        > Tel : +972-3-9293459
        > Fax: +972-3-9244249
        > Cell: +972-55-324044
        > EML:mauricem@xxxxxxxxxxx; mauricem@xxxxxxxxxxx
        > Mail: AFCON P.O.BOX 3120 Kiryat Arie, Petach Tikva 49130 ISRAEL
        > FedEx/UPS: 23 Hayetzira St. Kiryat Arie, Petach Tikva 49512 ISRAEL
        >


        
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html

        foxboro mailing list:
http://www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave


         
         
        
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
         
        foxboro mailing list:
http://www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
         


         
         
        
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
         
        foxboro mailing list:
http://www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
         
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: