Re: [foxboro] FW: Supervisory Modes for PIDA's and RATIO blocks

The CIMIO for FoxAOS server is built to support this. It is part of the
DMCplus Bridge. The DMCplus Bridge is available from both Aspen and Foxboro.



Alex Johnson
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx
For the latest information on ArchestrA, go to
www.invensys.com/Archestra.html.

 -----Original Message-----
From:   Hyde, James [mailto:James.Hyde@xxxxxxxxxxxxxx] 
Sent:   Tuesday, June 17, 2003 9:14 AM
To:     foxboro@xxxxxxxxxxxxx
Subject:        [foxboro] FW: Supervisory Modes for PIDA's and RATIO blocks

Thanks for the feedback but, apparently there is more to do than what is =
stated below.

Does anyone have an example or a reference of the C-calls that Aspen =
must do to set the .ACK bit?

Thanks,

James W. Hyde III
Controls Technician
Wellman Inc.
Office:         228-533-4528
Cell:       228-332-1371


If the reader of this e-mail is not an intended recipient, you have =
received this e-mail in error and any review, dissemination, =
distribution or copying is strictly prohibited. If you have received =
this e-mail in error, please notify the sender immediately by return =
e-mail and permanently delete the copy you received.


>  -----Original Message-----
> From:         Hyde, James =20
> Sent: Thursday, June 12, 2003 4:29 PM
> To:   'foxboro@xxxxxxxxxxxxx'
> Subject:      Supervisory Modes for PIDA's and RATIO blocks
>=20
> Hi,
>=20
> Does anyone have any experience with Supervisory Modes for PIDA's and =
RATIO blocks?
>=20
> We are thinking about enabling this option for ASPEN Tech to write =
Setpoints but don't understand
> some of the documentation.
>=20
> Should I be able to just set the SUP_OPT=3D1
> and Toggle the .SE parameter, thus enabling ASPEN to write into =
SUP_IN.  ????
>=20
>=20
> Any knowledge in the area would be greatly appreciated.
>=20
>=20
> Thanks,
>=20
> James W. Hyde III
> Controls Technician
> Wellman Inc.
> Office:       228-533-4528
> Cell:       228-332-1371
>=20
>=20
> If the reader of this e-mail is not an intended recipient, you have =
received this e-mail in error and any review, dissemination, =
distribution or copying is strictly prohibited. If you have received =
this e-mail in error, please notify the sender immediately by return =
e-mail and permanently delete the copy you received.
>=20
>=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: