Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Kevin FitzGerrell <fitzgerrell@xxxxxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 13 Feb 2006 09:20:03 +1300 (NZDT)
Imran,
The HOW part is very straightforward as I understand it. The FCP270(s) goes on
a small baseplate. The baseplate uses an adapter (part number P0926LC) and TAs
(part P0903VY) to talk to 100 series FBMs vi FBIs. So, if you already have
remote fieldbus it's very simple, if you are using local fieldbus you'll need to
add FBIs.
I'll email you a drawing off-list.
Regards,
Kevin FitzGerrell
Carter Holt Harvey, Ltd.
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Imran Butt
> Sent: Saturday, February 11, 2006 12:01 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] Can we connect Legacy 100 series FBM to ZCP270 or
> FCP270
> Dear All,
> I have a query that can we connect the legacy 100 series FBM to ZCP270
> or
> FCP270 and if we can then HOW.
> Best Regards,
> Imran Butt
> System Engineer
> Manstock Engineering Company (Pvt.) Ltd.
> 39-42 Farid Chambers, Abdullah Haroon Road
> Karachi - 74400, Pakistan
> TEL: +92-21-5678952, 5678953, 5673145
> FAX: +92-21-5682576
> Cell: +92-321-2102686
> E-mail: imran.butt@xxxxxxxxxxxxxxxxx
> URL: http://www.manstock-engg.com
>
>
>
> ______________________________________________________________________
> _
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
> ______________________________________________________________________
> _
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
> ______________________________________________________________________
> _
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- References:
- [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Johnson, Alex P (IPS)
Other related posts:
- » Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- » Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Johnson, Alex P (IPS)