Re: [foxboro] FCP270 & PDA problem

"Would you believe Invensys is capable of supplying a CP on which the last 
2
characters of the front label are SWAPPED!!?"

This IS a rhetorical question, right?  :)


Corey Clingo
BASF Corporation






"FoxPat" <fox@xxxxxxxxxxxxxxx> 
Sent by: foxboro-bounce@xxxxxxxxxxxxx
10/25/2007 03:52 PM
Please respond to
foxboro@xxxxxxxxxxxxx


To
<foxboro@xxxxxxxxxxxxx>
cc

Subject
[foxboro] FCP270 & PDA problem






English is not my native language but I do believe I understand <RANT MODE
ON>





A word of caution!





The label on the Front of the FCP270 is the last part of the MAC address
which you have to enter on the PDA to be able to communicate with the CP 
and
assign a letterbug, right ?



At least it worked liked that for CP's number 1 to 7 (out of 8) but number 
8
did not respond and failed to communicate.



Would you believe Invensys is capable of supplying a CP on which the last 
2
characters of the front label are SWAPPED!!?



Kind of makes me wonder about their quality certification? Don't they 
check
this before it leaves the factory???



Fortunately there's a second label on the bottom part of the FBM (you have
to pull the CP to see it) which did show the correct number!



Another precious hour wasted as I did not know about the label at the 
bottom
of the FBM and fully trusted the front label!



<RANT MODE OFF>



They do check-point and boot pretty fast though!



Regards,



Patrick Martens

Total Raff. Ned. N.V.



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: