Re: [foxboro] FCM10E

Frits,
There was an advantage upgrade on the FCM100 modules for XCP270,( turn in 
an FBI10 or FCM10E or similar and you get a serious discount on the 
FCM100...) I suppose even if they discontinued the FCM10e's they must have 
received a load of of these used FCM10e's..... New or refurbished, the 
risk isn't that big if you're using them in FT setup. Maybe you can 
convince Foxboro to sell the used FCM's to you? Purchase some extra spares 
and you're ok for a number of years.
Will lower your upgrade cost also....

Rgds,

Dirk




Dear listers and Foxboro spies, 
 

I believe that we've been seriously let down by Foxboro.

Some really bright cookie at Foxboro decided that with the
discontinuation of the CP60 they might as well discontinue the FCM10E.

This has taken away our upgrade path to the 200 series FBMs

We have just completed the replacement of CP30s to CP60s and have
already purchased some FCM10Es and base plates to progressively move to
the 200 series I/O.

...

Anyone else in the predicament?

Cheers,

Frits Schouten.

NZSteel.




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: