Re: [foxboro] FBM232 FDSI Configurator

  • From: "Inskeep, James" <James.Inskeep@xxxxxxxxxxxx>
  • To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
  • Date: Wed, 25 Apr 2012 20:32:26 -0400

Hi Joe, I've seen this when using an I/A station. If so try using a non I/A PC 
and copy over the XML file to the I/A station.

Regards,
James



On Apr 25, 2012, at 4:01 PM, "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx> wrote:

> FDSI folks,
> I am trying to create a Port, Generic Ethernet xml file for a new FBM232.
> No matter what I enter, when I try to save the configuration, I get an error
> message "Exception has been thrown by the target of an invocation".  Even if
> I open up an existing one and try to save it with no changes I get the same
> error message.  What am I missing?
> 
> The configuration parameters are too simple to mess up, there are just 2;
> Select FBM Type (FBM232) and the IP Address.  Duh!
> 
> Any suggestions?  Nothing in the manual offers any help.
> 
> Joseph M. Riccardi
> 
> 386-441-0250 Office
> 386-451-7607 Cell
> 
> Joe@xxxxxxxxxxxxx
> 
> "To give real service you must add something that cannot be bought or
> measured with money; and that is sincerity and integrity." - Donald A. Adams
> 
> 
> 
> 
> 
> 
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> 
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> 
> 

*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys plc, which is a company registered in England and 
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 
7AW (Registered number 166023). For a list of European legal entities within 
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.

You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail 
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject 
to the terms of any agreements between Invensys (and/or its subsidiaries and 
affiliates) and the recipient (and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 04-2012