Re: [foxboro] FBM231 highscore per FCP270

>are their users in the field with more than 2 "interface" FBMs (231,
>230, 233, 224, ...) per CP270?
Yes, We have 3 sets of cp270's talking as Modbus Ethernet (MB/TCP-IP)
gateways. Two sets use the FT 233's and one set has FT233's and a third
233 as an OPC client (non-FT). We also use the 4 slot baseplates and the
third has a second baseplate w/the opc 233 in it. We intend to use the
remaining slots as basic I/O. (I wonder if that is supported by
Foxboro?)
 Since figuring out that invalid points w/modbus made the Memory usage
ramp to max they have been working well. We did have some problems at
8.2 but have since worked thru them all.

Largest 

Ronald G. Schafer
Distributed Controls System Administrator
White Birch Paper Company
Bear Island L.L.C. Division
Ashland VA, 23005
Phone 804-227-4034
Fax 804-227-4052

Email: rschafer@xxxxxxxxxxxxxxxxxxxxxx
 
 

-- No attachments (even text) are allowed --
-- Type: text/x-vcard
-- File: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
-- Desc: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: