Re: [foxboro] FBM231 highscore per FCP270

OK, good to hear, if and when I get there.

As for new config tools, I was sort of waiting until IEE came out and 
hopefully replaced, rather than layered on top of, ICC.  And simplifying 
details is all well and good, as long as those details are not part of a 
larger underlying problem that should be fixed in its own right.  Sounds 
like in the DCI block case this is being addressed.


Corey Clingo
BASF Corporation






"Johnson, Alex P (IPS)" <alex.johnson@xxxxxxxxxxxxxxxx> 
Sent by: foxboro-bounce@xxxxxxxxxxxxx
05/28/2008 11:28 PM
Please respond to
foxboro@xxxxxxxxxxxxx


To
<foxboro@xxxxxxxxxxxxx>
cc

Subject
Re: [foxboro] FBM231 highscore per FCP270






V8.4 has added alarm limits and SCIs to the DCI blocks.

In general, the DCI blocks are much more functional in V8.4.

I know you aren't interested in new configuration tools, but part of our
solution is the user of more powerful configurators to simplify details.
At some point, you really should try them.


Regards,
 =

Alex Johnson
Invensys Process Systems
10900 Equity Drive
Houston, TX 77041
713 329 8472 (voice)
713 329 1600 (switchboard)
713 329 1944 (fax)
alex.johnson@xxxxxxxxxxxxxxxx
http://ips.invensys.com =





 



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: