Re: [foxboro] FBM230 configuration

Thanks for the advice Marcel and Alex.

The FBM230 is now communicating with the PLC now.

The problem was that I thought (from reading B0700AH) that we needed a
"Device Configuration file". So I built one with the FDSIconfig tool, and
pointed the ECB201.FILEID to it.

When I finally deleted the FILEID connection to the "Device Configuration
file" in the ECB201, the ECB201 was OK in SYSMGMT, and the PLC
communication began.

      -Regards, Brian Bates.

foxboro-bounce@xxxxxxxxxxxxx wrote on 02/17/2006 11:17:21 AM:

> Brian,
>
> Well, I'm just an Application Engineer and not from TAC
> so I can't tell you the exact answers to your detailed
> questions from my mind.
>
> Let me recommend the following:
>
> * For the software versions get help from Invensys TAC.
> * For the exact installation procedure get help from FoxDoc
>   and from Invensys Service
> * For the Modbus protocol issues get help from any
>   Modbus expert, may be from Invensys or from some
>   other company. For your personal message you sent
>   me directly I'll ask our local expert here.
>
> Hope that helps.
>
> Best regards -
>
> Marcel Sieling
> Senior Application Consultant
>
> Invensys Systems GmbH
> Emanuel-Leutze-Str. 11
> 40547 Duesseldorf
> Germany
> T: +49-211-5966-302
> F: +49-163-99-5966302
> M: +49-163-5966302
> Skype:  marcel.sieling
> mailto:marcel.sieling@xxxxxxxxxxxxxxxx
> http://www.foxboro-deutschland.de
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: