Re: [foxboro] FBM224-multiple slaves on one port

The FBM244 wait for the timeout, after that go on with the following device.

Corey R Clingo escribió:
> Hello Magic 8-ball o' Foxboro,
>
> I was wondering if anyone had an FBM224 connected to multiple Modbus slave 
> devices on one port.  Specifically what I was interested in is behavior in 
> the face of failure of one device.  Does the FBM time the failed device 
> out each time before moving on to the next device in the chain, or does it 
> go on to other devices while waiting for a response from the failed one?
>
>
> Thanks,
>
>
> Corey Clingo
> BASF Corporation
>
>
>
>
>  
>  
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
>
>
>   
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: