Re: [foxboro] FBM01 weirdness

Corey,

Depending on the criticality of the other seven channels on this FBM01, you may 
wish to try a Delete / Undelete  (ONLINE) of the ECB for this FBM.

Terry

________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of 
Corey R Clingo [corey.clingo@xxxxxxxx]
Sent: July 9, 2009 4:46 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] FBM01 weirdness

Hi list,

We came across something weird with an FBM01 yesterday.  On one point, the
counts (MEAS) value is valid and moving (around 44000), but the PNT value
is BAD, red and frozen.  Other points on the card are working fine.


We are assuming we have a bad channel.  The AIN block is fine, in auto,
SCI=3, ranges good, etc.  LASTGV=1 (I _hate_ that default :) so I don't
know what the value would have gone to if it were left as nature intended.
 We deleted/undeleted the block, no luck.


Anyone else seen this?


Corey Clingo
BASF Corp.



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: