Re: [foxboro] FBM 215

You may be ahead of this, but perhaps some of it will be useful:
There will be one ECB200 and eight ECB201 blocks (one per channel). In the DCI 
block (ROUT), the PNT_NO is not a number but is the text from table 5.4 page 39 
of the manual B0400FF, CURRENT is the only one for ROUT. I think you would use 
an RIN or STRIN to get data from the valve positioner.

Dennis O. Freeman
Southern Company Services
National Carbon Capture Center
31800 Highway 25 North
P.O. Box 1069
Wilsonville, AL 35186
205.670.5961 (W)
205.396.0844
202.670.5843 (F)

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Badura, Tom
Sent: Wednesday, July 18, 2012 15:48
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FBM 215

Ferna,

See B0400FF Hart FBM User Guide.  There are a number of parameters in
both the ECB201 and connected DCI blocks that need to be configured
correctly.  A lot depends on if you are working with the 4-20mA signal,
Hart Variables, or both.


Tom Badura
Plastics Engineering Company
tbadura@xxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of ferna lopez
Sent: Wednesday, July 18, 2012 10:31 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] FBM 215

How can i configure a field device in a  module 215 hart, i create a ECB
201 but ICC sends a warning message "invalid point connection" or
"duplicate point connection"     
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: