Re: [foxboro] FBM 10 with FBM 13 Extender

It looks like you have got some pretty good advice on things to check. 
       In addition to these things, you nay try changing out the Y 
adapter if you haven't already.  I've seen a couple that for some reason 
just stopped working.

Good luck!

Ray ...
Brian Long wrote:
> We are unable to get an FBM10 with 13 extender to go online.  (FBM downloads
> and EEPROMS)  All the hardware seems to be ok, new FBM's, Y adapter,
> nosecones and letterbugs.  We added a new rack with new FBI's thinking we
> have a backplane issue.  This is an existing pair that has been installed
> for a number of years, running on a CP40B hosted by an AW51B box at 6.5.3.
> There are other CP's that have similar working pairs hosted by this box.
> Foxboro has no solution at this time. 
>  
> 
> Any ideas would be helpful.  We've already split the pair up (installed two
> single FBM10's) and are back running.
> 
>  


-- 
Ray Lloyd            Process Control Outlet
rlloyd@xxxxxxxx      http://www.pco2.com
(281)421-1321
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: