Re: [foxboro] FBM 10 with FBM 13 Extender

 Brian,


  B0193AC has no specification for 10/13 or 08/15 combinations.


  Best Regards,


  Scott Landry

  IPS Field Services
  USA South Region




-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Brian Long
Sent: Saturday, May 23, 2009 2:52 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FBM 10 with FBM 13 Extender

Yes, we took all the hardware and installed on another node, everything
worked just fine.  It seems to be related to just this CP.  We even
load_all'd and didn't help.

Thanks, 
Brian

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On
Behalf Of Douglas G. Lloyd
Sent: Saturday, May 23, 2009 1:13 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FBM 10 with FBM 13 Extender

Brian,

Just a quick thought, did you identify the EXTYPE on the ECB block??

         NAME    XXXXXX                            BUSWDS  0
          TYPE    ECB8                              FPM08   0
          DESCRP                                    FSMM08  0
          PERIOD  1                                 FSDM08  0XC0
          PHASE   0                                 FPE08   0
          DEV_ID  XXXXXX                            FSME08  0
          HWTYPE  10                                FSDE08  0
          SWTYPE  8                                 OVRDIS  0
          EXTYPE  13                                SIMOPT  0
          FSENAB  1                                 SIMCIN  0x0
          FSDLAY  1000                              END

Regards,

Doug Lloyd
DGL Controls

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On
Behalf Of Brian Long
Sent: Saturday, May 23, 2009 2:03 PM
To: Foxboro
Subject: [foxboro] FBM 10 with FBM 13 Extender

We are unable to get an FBM10 with 13 extender to go online.  (FBM
downloads
and EEPROMS)  All the hardware seems to be ok, new FBM's, Y adapter,
nosecones and letterbugs.  We added a new rack with new FBI's thinking
we
have a backplane issue.  This is an existing pair that has been
installed
for a number of years, running on a CP40B hosted by an AW51B box at
6.5.3.
There are other CP's that have similar working pairs hosted by this box.
Foxboro has no solution at this time. 
 
Any ideas would be helpful.  We've already split the pair up (installed
two
single FBM10's) and are back running.

Thanks,

Brain Long

Arkansas Kraft


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


** Confidentiality Notice:
This e-mail, including any associated or attached files, is intended solely for 
the individual or entity to which it is addressed. This e-mail is confidential 
and may well also be legally privileged. If you have received it in error, you 
are on notice of its status. Please notify the sender immediately by reply 
e-mail and then delete this message from your system. Please do not copy it or 
use it for any purposes, or disclose its contents to any other person.

This email is from the Invensys Process Systems business unit of the Invensys 
Group, a group of companies owned by Invensys plc, which is a company 
registered in England and Wales with its registered office at Portland House, 
Bressenden Place, London, SW1E 5BF (Registered number 166023).  For a list of 
European legal entities within the Invensys Group, please go to 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.  

You may contact Invensys plc on +44 (0)20 7821 3848 or e-mail 
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be 
subject to the terms of any agreements between Invensys (and/or its 
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and 
affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: