Re: [foxboro] Exceed 9 through Firewall

You may also need to open the port required to run the startup script  
from your PC.

It depends on how you start the script

ssh = 22/tcp
telnet = 23/tcp
rsh = 514/tcp
rlogin = 513/tcp
rexec = 512/tcp

Ted

On Jun 9, 2009, at 9:51 AM, William C Ricker wrote:

> Brian,
>
> The port you need to open is 6000 + the display number.  Hence, if you
> want AWLBUG:1 (display 1), open port 6001, etc.
>
> Regards,
> William C Ricker
> FeedForward, Inc,
>
>
>> What needs to be configured to allow Exceed V9.0 to pass through a
> firewall?
>> We've opened port 6000, are there any other ports used?  Were just
> planning
>> to use it for a remote Display Manager.
>
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys  
> Process
> Systems (formerly The Foxboro Company). Use the info you obtain here  
> at
> your own risks. Read http://www.thecassandraproject.org/ 
> disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/ 
> foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx? 
> subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx? 
> subject=leave
>
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: