The information is read from the file at reboot and placed in a shared memory segment. Net result, you can't change it on the fly; a reboot is required. Regards, Alex Johnson Invensys 10707 Haddington Houston, TX 77063 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> For the latest information on ArchestrA, go to www.invensys.com/Archestra.html <http://www.invensys.com/divisions/Archestra.html> . -----Original Message----- From: Brian Bates [SMTP:batesb@xxxxxxxxxxx] Sent: Monday, January 20, 2003 8:02 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Display manager initial environment Good morning all. While we are on the subject, does anybody know a way to evoke changes in the "dmcfg" file without rebooting the box? Is there a process that you can grep for, kill, then restart? Brian Bates Bowater _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave