Roger,
As you mentioned, the initial startup environment for Display Manger is
determined by the text entry that has been put into the TYPE section of the
/usr/fox/customer/hi/dmcfg. If you are running Display Manager, then it
should work if the environment exists as spelled and contains correct
syntax. However, if you are running FoxView, I think you will experience
the problem where FoxView will only start with the INIT environment
regardless of what is configured in the dmcfg file.
Neil Martin
Huntsman Corporation
7114 North Lamar Blvd
Austin, TX. 78752
ph) 512-483-0119
Roger Smith
<RSmith@xxxxxxxxxx To: "Cassandra Project
(E-mail)" <foxboro@xxxxxxxxxxxxx>
.ga.us> cc:
Sent by: Subject: [foxboro] Display
manager initial environment
foxboro-bounce@fre
elists.org
01/17/03 03:31 PM
Please respond to
foxboro
The documentation on display manager configuration indicates one can
configure the initial environment for a DM via the DM type parameter.
However, I can not get this to work. I seem to remember this was a known
problem in the past, but I'm not sure. Does this work now (I'm at V6.1.1),
and if so, are there some tricks to it?
Roger B. Smith
Chief, Process Control Engineering
Waste Water Services
City of Atlanta
404 350-4952
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave