Re: [foxboro] DeviceNet communication

I've never done it, but I've been told that it can be done under V6.4 using
the PROFIbus DP FBM and 3rd party DeviceNet to PROFIbus PA adapters.

Hope this is useful.

Alex Johnson
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx
For the latest information on ArchestrA, go to
www.invensys.com/Archestra.html.

 -----Original Message-----
From:   Andres Chianale M. (Inforsa) [mailto:achianale@xxxxxxxxxxxxxxx] 
Sent:   Wednesday, May 14, 2003 1:41 PM
To:     foxboro@xxxxxxxxxxxxx
Subject:        [foxboro] DeviceNet communication


Hi,

Has somebody experience on communicating Rockwell modules to the I/A =
system
through Devicenet? Specifically the vibration Module Entek XM-120 from
Rockwell?

Thanks,

Andr=E9s Chianale M.
Systems Engineer
Inforsa
Chile
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: