Re: [foxboro] Day 0 CD's not working.




Hello Frits,

We have had the same problem with the I/A 6.4 CD-Roms. We have send the CD's
back to Foxboro and a CAR was opened, the CAR number is 2000456.

After investigation, the CAR was closed with the following comment:

Determined to be a "one off" production error as no further problems were found.

Regards,

Wim

Verberckt Wim
Afdeling TS-EP-PAS
Bayer Antwerpen N.V.
Haven 507 - Scheldelaan 420
B-2040 Antwerpen
Tel. 32-(0)3-540.39.93
Fax. 32-(0)3-540.36.99
Email: wim.verberckt.wv@xxxxxxxxxxxxxxx


                                                                                
                                              
                      foxboro-bounce@fr                                         
                                              
                      eelists.org              To:       "Foxboro DCS Mail List 
(E-mail)" <foxboro@xxxxxxxxxxxxx>             
                                               cc:                              
                                              
                      03/09/2003 06:28         Subject:  [foxboro] Day 0 CD's 
not working.                                    
                      Please respond to                                         
                                              
                      foxboro                                                   
                                              
                                                                                
                                              
                                                                                
                                              




Hello all,
we have a small but significant problem. Bought the upgrade to 6.4, got the
CD etc but the system refuses to boot from the CD.
One might say, that the CD drive is bad but, booting from the 6.2 CD is not
a problem.
I thought, lets be clever and see if I can mount the 6.4 CD. Nope, no show.
Again, the 6.2 CD was fine for mounting.

We've put it to our local Foxboro rep. and we got a copy of 6.4. Doesn't
boot either.

We have an externar CD drive mounted to a WP51B.
Anybody any ideas?

Cheers,
Frits Schouten
Process Computing Department
New Zealand Steel
Phone:   +64 +9 375 8111 ext 5261
Email:   Frits.Schouten@xxxxxxxxxxxx



EOM

NOTICE - This message and any attached files may contain information that is
confidential and/or subject of legal privilege intended only for use by the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein.  If you have received this
message in error please notify the sender immediately and delete the
message.




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: