Re: [foxboro] DEP block error code

Mr Omprakash, did you recently upgraded your I/A version or what is =
your I/A
Version?

Are you executing your independent block in CP40, wherein the referred
C:B.Parameters are .PNT or any secured parameters. If so, change them =
to
un-secured parameters. It will rectify your problem.

Regards,
Naresh


-----Original Message-----
From: kevin.fitzgerrell@xxxxxxxxxxxx =
[mailto:kevin.fitzgerrell@xxxxxxxxxxxx]

Sent: 16 =E0=AE=AE=E0=AE=BE=E0=AE=B0=E0=AF=8D=E0=AE=9A=E0=AF=8D 2004 =
23:12
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] DEP block error code


Error code of 3 should be "SECURED - attempt to set a parameter that is
secured" -- Is your TIMR3R parameter connected?

Regards,

Kevin FitzGerrell
Systems Engineer
Foxboro New Zealand
------------------------------------
Tel:  +64 (9) 573 7690
Fax:  +64 (9) 573 7691


=20

                    "Omprakash"

                    <omprakash@jana-ks        To:
<foxboro@xxxxxxxxxxxxx>                                          =20
                    a.com>                    cc:

                    Sent by:                  Subject:     [foxboro] =
DEP
block error code                              =20
                    foxboro-bounce@fre

                    elists.org

=20

=20

                    13/03/2004 09:43

                    PM

                    Please respond to

                    foxboro

=20

=20




Hi List
The block detail of one of DEP block we use showed "SYSERR" and block
went into manual. The error code displayed just below block name was 9.

This block has SBX's programmed for users and system errors. The SBX's
dump the OP_ERR, STEP_NO and BLOCK_STMNO values to .SN0009 which was
showed as "Error 3: Step 1, Stm 20. Statement 20 in the independent
block is

STOP_TIMER(::TIMER.TIMER3);

The block named TIMER exists in the same compound of the DEP block.

Anybody experienced this problem? Any suggestions

Regards

G.R.OMPRAKASH
Instrument & Control Engineer
Jubail Chemical Industries Company (JANA)
PoBox:10661, Jubail Industrial city 31961
Jubail, Saudi Arabia

Phone   +966 3 3585002 Ext 323
Fax       +966 3 3583192
Mobile   +966 5 3965289
Email     omprakash@xxxxxxxxxxxx







_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave





=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: