Re: [foxboro] DCS Display tree

Edy,

You can call your DCS displays on a PC using Exceed. Then capture this
display using Alt+ Print Screen. This display can be saved as .jpg file
and can be used in PI process book. 

Regards,
Sivanath Sutty
Automation Engineer
Abu Dhabi Oil Refining Co

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Edy_Kurniawan@xxxxxxx
Sent: Wednesday, November 19, 2003 6:29 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] DCS Display tree

Dear all,

How could I get the DCS display tree ? or Do I have to create it =
manually ?
How about if I just need to get the Compound:Block.Parameter -s used =
list at each DCS display ?

So I can easily duplicate DCS displays into PI displays.
Does anyone have best practise for this purpose ?

Best regards and thanks for every response,

=E9dy kurniawan
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: