Re: [foxboro] Cyan displays...

Jamie,

Not exactly sure if this is associated with your problem but...If you
are using Hummingbird Exceed be sure that you close it properly
otherwise OM lists will be left open and can cause problems later(cyan
values begin to appear) if too many are open.  Solution would be to
reboot the box from which you are opening displays with Exceed.

Regards,

Michael L. Jaudon
Kerr-McGee Chemical LLC
(662)343-8710 Office
(662)304-0313 Cell
mjaudon@xxxxxxx

If you are not the intended recipient of this e-mail message, any use,
distribution or copying of the message is prohibited.  Please let me
know immediately by return e-mail if you have received this message by
mistake, then delete the e-mail message.  Thank you.


-----Original Message-----
From: Jaime Claramunt R. (Inforsa) [mailto:jclaramunt@xxxxxxxxxxxxxxx]=20
Sent: Wednesday, November 26, 2003 8:22 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Cyan displays...


Hi list,

Say, I remember you've been discussing about some cyan values on screen
displays...but I don't recall the actual issue... I had something
similar: some of the values on some of the displays appear in cyan with
no values, but all the conections and overlays and commands were working
fine (in all WPs). After some operations, openning, closing, changing
displays, the problem was "solved". We saw that te CP free memory is
quite low (CP40A FT), and when openning some of these displays the
amount was reduced. Control charge is not so high (70-75), phasing seems
Ok, maybe CP damaged ? too much drawings on display ?=20

Any suggestion ?

Thanks
B.R.

Jaime Claramunt
Automation Engineer
INFORSA Paper Mill
CHILE
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20


Important Notice!
If you are not the intended recipient of this e-mail message,
any use, distribution or copying of the message is prohibited.
Please let me know immediately by return e-mail if you have received =
this message by mistake,
then delete the e-mail message.
Thank you.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: